AeroNav Vector is an advanced device for mission navigation and camera control based on dual c/a coded L1 GNSS receivers that support refresh rates of 10 Hz and Heading/Attitude. The use of GPS, Glonass, BeiDou and Galileo makes this device an extreme robust positioning and navigation system. This enables precise navigation for accurate aerial imaging.
AeroNav GNSS is a highly compact system including all the basic features needed for navigation guidance and measurement of X,Y,Z projection centers and true Heading and can support also EXIF information for the camera.
A bi-directional RS232 communication with AeroTopoL FMS supports camera trigger and camera event management:
AeroNav Vector Technical Specifications
TECHNICAL SPECIFICATION | ||
---|---|---|
Receiver Type | GNSS single-frequency RTK with carrier phase | |
Signals Received | GPS, GLONASS, BeiDou, GALILEO1 and QZSS1 | |
Channels | 424 | |
Sensitivity | -142 dBm | |
SBAS Tracking | 2-channel | parallel tracking |
Update Rate | 10 Hz standard | |
Accuracy | Horizontal (RMS) | Vertical (RMS) |
SBAS (WAAS) | 0.3 m | 0.6 m |
Autonomous* | 1.2 m | 2.5 m *depends on multipath environment, number of satellites in view, satellite geometry, and ionospheric activity |
GNSS Heading (RMS) | 0.30˚ rms @ 0.5 m antenna separation | 0.15˚ rms @ 1.0 m antenna separation |
Pitch/Roll (RMS) | 0.03˚ | |
Timing (1PPS) Accuracy | 20 ns | |
Start-up time GNSS | <60 s typical | |
Start-up time Heading | < 100 s @ 1 m separation | |
Sat. re-acquisition | <1 s | |
Event marker input | active low | falling edge sync |
Interface | RS232 @155.200 baud | |
Communication | NMEA 0183, RECO and AeroTopoL | |
Total weight | 0.3 kg | |
Dimensions | 200 x 85 mm x 50 mm | |
Power | 9-30 V, 250-450 mA | |
Temperature | -10 to 50°C |